On this page
A DJ rider is the document that tells a venue what a DJ needs to play. The technical rider (or tech rider) lists the equipment: players, mixer, booth monitors, sound system and booth setup. The hospitality rider covers drinks, food, travel and accommodation. Most club DJs send both as one page, and the production team uses it to prepare the booth before you arrive.
A tech rider is the difference between a venue showing up ready and a venue making you DJ off a borrowed controller because nobody knew you needed CDJs. It still happens in 2026, and almost every time it's because the DJ had no rider, or one so vague it was useless.
This guide covers what a DJ rider is, what goes in every section of a tech rider, a free template you can copy in five minutes, and seven real rider examples for club, techno, uptempo, festival, vinyl and wedding gigs.
Key takeaways
- A DJ rider = technical rider (gear and setup) + hospitality rider (drinks, food, travel).
- The tech rider covers six things: players, mixer, monitoring, sound system, booth setup and USB or laptop policy.
- Mark two or three items as required and everything else as preferred.
- Keep it to one page and update it the day your setup changes.
- Send it as part of your press kit link, not as an old email attachment.
What is a DJ tech rider?
A DJ tech rider is a document listing the technical equipment, setup, monitoring and operational requirements a DJ needs to perform. It's sent to the venue or promoter in advance so the production team can prepare the booth, source any missing gear and flag problems before the night instead of during it. "Technical rider", "tech rider" and "DJ rider" usually refer to the same document.
It's read by the production manager, the technical director and the venue engineer. Write it for them: short lines, exact models, no adjectives.
What does "rider" mean for a DJ?
In music, a rider is a list of conditions attached to a booking contract. The word comes from the idea that it "rides along" with the contract. For a DJ, the rider is everything the venue agrees to provide so you can play properly: the gear in the booth, the monitoring, the set times and the hospitality on the night. If it's in the signed rider, the venue is responsible for it.
Tech rider vs hospitality rider
| Technical rider | Hospitality rider | |
|---|---|---|
| Covers | Players, mixer, monitors, sound system, booth, power | Drinks, food, hotel, travel, guest list, backstage access |
| Read by | Production manager, venue engineer | Promoter, artist liaison |
| Typical length | Half a page | A few lines for clubs, more for festivals |
| Can you play without it? | Often no | Yes, but it shapes how the night feels |
Most club DJs keep both on one page, with hospitality as the last section. For bigger festival bookings, a separate hospitality rider is common because different people handle it.
Why every DJ needs a tech rider (even at small gigs)
Some DJs skip the tech rider until they're big enough to "need" one. That logic is backwards. The smaller the gig, the more likely the venue is underprepared, and a clear rider is the only thing that protects you from an unusable setup.
- It prevents miscommunication. What you expect and what the venue assumed are often completely different.
- It protects your performance. You can't play well on equipment you don't know.
- It signals professionalism. DJs with riders are taken more seriously than DJs without.
- It lets the promoter plan costs. If your rider means renting gear, they need to know before they confirm.
- It gives you ground if things break. A signed rider documents what the venue was responsible for.
What to include in a DJ tech rider (2026 checklist)
A complete DJ tech rider covers six core sections: playback, mixer, monitoring, sound system, booth setup and USB or laptop policy. Add hospitality at the end if you need it.
Playback equipment
Be specific. The CDJ-3000 is the current industry standard: list it as preferred. The CDJ-2000NXS2 is still widely available and acceptable as a fallback: list it explicitly so the venue knows it's fine. State how many decks you need: two minimum, three or four for longer sets or if you layer tracks. Be realistic: asking for four CDJ-3000s at a 150-cap basement party will get you ignored or resented before you've played a note.
Mixer
The Pioneer DJM-A9 is the current flagship. The DJM-900NXS2 is still the standard in most venues and perfectly acceptable. The Allen & Heath Xone:96 is a strong choice for techno and house: list it as "accepted with prior confirmation", because not every venue stocks one. Specify a four-channel minimum so nobody hands you a two-channel battle mixer.
Booth monitors
This matters more than most DJs write in their riders. You need booth monitoring with independent volume control, separate from the front-of-house mix, positioned at ear height when you're standing. Ask for monitors that can actually compete with the room (roughly 95 to 103 dB at one meter): anything weaker becomes inaudible at peak time. If the booth monitor has no independent send, that needs solving before the night, not during your set.
Sound system minimum
You rarely need to name a brand. For mid-size clubs, "full-range system with even coverage across the dance floor and adequate sub-bass" is specific enough. For high-end bookings, naming acceptable systems (L-Acoustics, d&b audiotechnik, Funktion-One) is fine. For small gigs, skip this section: it reads as out of touch.
Booth setup and ergonomics
A standard booth table sits at about 90 cm: say so, so your CDJs don't end up on a coffee table. The surface must be sturdy and vibration-free (a wobbly table next to the subs makes players skip). Power sockets within reach, ideally with surge protection. Lighting that lets you read your screens without a spotlight in your face. And a booth kept clear of drinks and bags.
USB and laptop policy
Say how you play. USB primary with a backup USB? Your own laptop, and do you need a link cable? If the venue provides a laptop, confirm the software and ports in advance. Rekordbox users: check the venue's players are compatible with your export version.
Backup and redundancy
Bring a second USB with your full set. Know what happens if a player dies mid-set: is there a spare, and who swaps it? Mentioning your backup plan in one line tells a promoter you've done this before.
Hospitality
Keep it realistic. Water and a towel in the booth, a meal if you're playing a long slot. For bigger bookings: travel, accommodation and a reasonable drinks allowance are standard. The golden rule: if you wouldn't be comfortable reading your hospitality list out loud to a promoter you just met, it's too much.
Free DJ tech rider template (copy-paste)
Copy this, replace everything in [brackets], and you have a working tech rider in under five minutes. Prefer a ready-made PDF? The free DJ tech rider generator builds one in two minutes, no signup.
Free DJ tech rider template
TECHNICAL RIDER: [DJ NAME] Genre: [Techno / House / Hardstyle / ...] · Set length: [60 / 90 / 120] minutes PLAYERS (required) - [2x] Pioneer DJ CDJ-3000 (CDJ-2000NXS2 accepted) - Linked via Pro DJ Link, Rekordbox compatible MIXER (required) - Pioneer DJ DJM-A9 (DJM-900NXS2 accepted) - 4-channel minimum MONITORING (required) - [1 or 2] dedicated booth monitors at ear height - Independent volume control, separate from the main mix BOOTH SETUP (preferred) - Sturdy, vibration-free table at about 90 cm - 2x power sockets at the booth - Functional booth lighting, booth kept clear of drinks USB / LAPTOP - USB primary, backup USB brought by the artist - [Own laptop + link cable, if used] HOSPITALITY - Still water in the booth - [Your drinks / meal for long sets] CONTACT FOR TECHNICAL QUESTIONS - [email or press kit link]
DJ rider examples you can copy
Templates are a start, but it helps to see real riders. Below are seven: three real riders from DJs on Backstage.dj (mine, plus two I've anonymized) and four templates I wrote for setups we don't have a real example of yet. Each one is labeled.
Every rider follows the same order a production manager checks things in: players, mixer, monitoring, sound system, then logistics and hospitality. Watch the words required and preferred. Required means you won't play without it. Preferred means you'd like it but can adapt. Mark everything as required and nobody takes the rider seriously. Mark the two or three things that truly matter and the production team will fight to get them right.
Example 1: Uptempo / hardcore club DJ (real rider)
This is the rider I send for my own bookings as Astro Blast. Uptempo and hardcore run above 200 BPM with very heavy kicks, so monitoring is the one part I won't compromise on.
Technical rider: Uptempo / Hardcore
TECHNICAL RIDER: ASTRO BLAST (Uptempo / Hardcore) PLAYERS (required) - Pioneer DJ CDJ-3000 (CDJ-2000NXS2 accepted) MIXER (required) - Pioneer DJ DJM-A9 or DJM-900NXS2 MONITORING (required) - 2x monitor wedges in the booth SOUND SYSTEM (required) - Full-range PA adequate for the venue LOGISTICS - Travel and hotel covered by the promoter HOSPITALITY - Still water - Spirits and mixers (vodka and Red Bull)
Why it works: it's short on purpose. Everything fits on one phone screen, which is how most promoters will read it.
Example 2: Melodic techno / tech house DJ (real rider, anonymized)
From a melodic techno and tech house DJ on Backstage.dj, translated from French. Two details stand out: it says what the DJ brings (USB sticks and headphones), and it allows alternative gear "after validation", which keeps the conversation open instead of turning down a booking over a mixer model.
Technical rider: Melodic techno / Tech house
TECHNICAL RIDER (Melodic Techno / Tech House) PLAYERS (preferred) - Minimum 2x Pioneer DJ CDJ-2000NXS2 or CDJ-3000. Ideally 3. MIXER (preferred) - Pioneer DJ DJM-900NXS2, DJM-A9 or DJM-V10 - Equivalent professional mixer possible after validation in advance PLAYBACK - Set prepared on Rekordbox USB - The artist brings their own USB sticks and headphones MONITORING (required) - 1 powerful DJ monitor, adjustable from the booth - Ideally 2, depending on stage setup SOUND SYSTEM (required) - Professional sound system suited to the event's capacity HOSPITALITY - Artist / backstage access - Water available in the booth - Soft drinks (Coca-Cola Zero or Pepsi Max) - Snack or artist meal, depending on the event - Secure space for personal belongings - Parking
Example 3: Uptempo / zaag DJ (real rider, anonymized)
Another real rider, from an uptempo DJ. The line to steal is "independent volume control". Booth monitors that are too quiet, too loud or tied to the main mix are the most common complaint DJs have on the night, and this line prevents it in five words.
Technical rider: Uptempo / Zaag
TECHNICAL RIDER (Uptempo / Zaag) PLAYERS (required) - Current Pioneer DJ CDJs MIXER (preferred) - Pioneer DJ DJM-900NXS or newer (e.g. DJM-900NXS2) MONITORING (required) - 2x booth monitors with independent volume control HOSPITALITY - Chilled beer (local preferred) - Still water - 1 bottle of gin + mixers (tonic, Fanta, etc.) - 1 towel
And if you've ever played an hour at 200 BPM, you already understand the towel.
Example 4: Peak-time techno club (template)
A template for a standard club techno booking. The booth section is the part most DJs forget: a wobbly table next to the subs makes a CDJ skip, and a booth full of drinks is a spilled-mixer story waiting to happen.
Template: Peak-time techno club
TECHNICAL RIDER: [DJ NAME] (Techno) PLAYERS (required) - 3x Pioneer DJ CDJ-3000, linked, on current firmware MIXER (required) - Pioneer DJ DJM-A9 or DJM-V10 - Allen & Heath Xone:96 accepted MONITORING (required) - 2x active booth monitors at head height - Fed from the mixer's booth output, controllable from the booth BOOTH - Stable, vibration-free surface at roughly hip height - 2x power sockets at the booth - Booth kept clear of drinks and bags SOUND SYSTEM (required) - Full-range system with subs, sized for the room LOGISTICS - Booth access [30] minutes before set time - One contact person on the night: [name, phone] HOSPITALITY - Still water in the booth - [Your drinks]
Example 5: Festival stage (template)
Festivals have production teams, advance forms and tight changeovers. Your rider should answer their questions before they ask: how many people travel, how many passes, how long you need to change over. Hardstyle and hard dance DJs, who mostly play festivals, should also list a microphone here if they MC.
Template: Festival stage
TECHNICAL RIDER: [DJ NAME] (Festival) PLAYERS (required) - 4x Pioneer DJ CDJ-3000, linked MIXER (required) - Pioneer DJ DJM-A9 or DJM-V10 MONITORING (required) - 2x booth monitors + sidefills - Separate monitor mix, controllable from the booth STAGE - DJ riser with booth at roughly hip height - Weather protection for the equipment if outdoors - Stage technician available during changeover - Changeover time needed: [X] minutes - [Wireless microphone, if you MC] SOUND SYSTEM - As per festival production LOGISTICS - Travel and accommodation for [1 + 1] - Ground transport between airport, hotel and festival site - Artist passes: [2] - Dressing room or green room access HOSPITALITY - Still water on stage - Meal or meal buyout - [Your drinks]
Example 6: Vinyl DJ (template)
Vinyl riders are longer for a good reason: turntables are sensitive to bass feedback and vibration, and a club that mostly hosts digital DJs may not have thought about it. Three lines of this rider exist only to stop the needle from jumping.
Template: Vinyl DJ
TECHNICAL RIDER: [DJ NAME] (Vinyl) TURNTABLES (required) - 2x Technics SL-1200 (MK7, GR or MK2/MK5 in good condition) - Cartridges and styluses in good condition + 1 spare stylus - Isolated turntable platform or shock-absorbing feet MIXER (required) - Allen & Heath Xone:92, a rotary mixer, or Pioneer DJ DJM-900NXS2 PLAYERS (preferred) - 1x Pioneer DJ CDJ for edits not on vinyl MONITORING (required) - 2x booth monitors, positioned so they don't feed back into the turntables BOOTH - Space next to the decks for 2 record bags HOSPITALITY - Still water in the booth - [Your drinks]
Example 7: Mobile / wedding DJ (template)
When you bring your own sound system, the rider flips around: it's no longer about what gear you need, it's about what the venue has to provide so your gear can work. Power, space, access, time, and usually a microphone for speeches.
Template: Mobile / wedding DJ
TECHNICAL RIDER: [DJ NAME] (Mobile / Wedding) DJ PROVIDES - Full sound system, DJ controller, microphones and lighting VENUE PROVIDES (required) - 2x power outlets on separate circuits within [X] m of the DJ area - A sturdy table of about 2 m (6 ft), or floor space for the DJ booth - Covered area if outdoors (no setup in rain or direct sun) - Load-in access and parking close to the entrance - [90] minutes of setup time before guests arrive - [60] minutes of teardown time after the last song LOGISTICS - Final timeline (entrance, speeches, first dance, last song) [X] days before the event - One contact person on the day: [name, phone] HOSPITALITY - Hot meal and soft drinks during the event
How to adapt any of these in five minutes
- Write the gear you play on, not the gear that sounds impressive. A promoter who rents a DJM-V10 for you and watches you use two channels won't forget it.
- Mark two or three things as required. Everything else is preferred.
- Keep it to one page or one phone screen.
- Put your name and one contact line at the top.
- Update it the day your setup changes. An outdated rider is worse than no rider, because the venue trusts it.
Tech rider mistakes that get DJs blacklisted
- Asking for top-spec gear at a 100-cap underground party. Read the room.
- A three-page hospitality list at a club gig. That gets remembered for the wrong reasons.
- No fallback options. Listing only your first choice forces the venue to scramble.
- Vague lines like "professional setup required". That means nothing to a production team.
- Outdated specs. Still asking for a CDJ-2000 (non-NXS2) in 2026 tells everyone you haven't touched your rider in years.
- Forgetting to update it after you switch setups, for example from CDJs to a controller.
How to share your tech rider
A rider buried in an email from last year is the reason DJs show up to the wrong mixer. The better approach is to keep your tech rider inside your DJ press kit, at a permanent link that always shows the current version. When a promoter asks for your rider, you send your press kit link. The rider is already there, next to your mixes, photos and booking contact.
On Backstage.dj, you pick your gear from a list, mark each item required or preferred, and your rider sits on your press kit. It also generates a downloadable PDF that promoters can pull at any time, and it updates itself when you change your setup. Building the rider and its PDF is free. Pro adds a QR code to the PDF, removes the Backstage.dj footer, and shows you in analytics when promoters download it. Build your tech rider for free and have it live in about ten minutes. Once your dates are confirmed, the free tour poster maker turns them into an Instagram story or post.
Find DJs by genre
Frequently asked questions
What is a DJ rider?
A DJ rider is the document that tells a venue or promoter what a DJ needs to perform. It usually has two parts: the technical rider (players, mixer, booth monitors, sound system, booth setup) and the hospitality rider (drinks, food, travel, hotel, guest list).
What does rider mean for a DJ?
In music, a rider is a list of requirements attached to a booking. For a DJ it means the equipment and conditions needed to play (the tech rider) plus anything else agreed for the night, like drinks, food or travel (the hospitality rider).
What is a DJ tech rider?
A DJ tech rider (technical rider) lists the equipment, setup and monitoring a DJ needs to perform. The venue's production team uses it to prepare the booth before the event.
What should a DJ rider include?
At minimum: your players (CDJ model or turntables), your mixer, your booth monitoring and the sound system you expect. Most riders also add booth setup, logistics (set times, travel, a contact person) and a short hospitality section. Mark each item as required or preferred.
What's the difference between a technical rider and a hospitality rider?
The technical rider covers equipment and stage setup. The hospitality rider covers drinks, food, accommodation, travel, guest list and backstage access. Most club DJs keep both on one page, with hospitality as the last section.
Do I need a tech rider for a small club gig?
Yes. Even a five-line rider listing your players, mixer and monitors prevents the "you didn't tell us you needed that" problem on the night, and it shows the promoter you take the booking seriously.
What CDJs and mixer should I ask for in 2026?
CDJ-3000 is the current standard, with CDJ-2000NXS2 as a widely accepted fallback. For mixers, the DJM-A9 is the current Pioneer flagship and the DJM-900NXS2 is still standard in most clubs. The Allen & Heath Xone:96 is popular with techno DJs and should be listed as accepted with confirmation.
How long should a DJ tech rider be?
One page, or one phone screen. A production team should be able to read it in under 60 seconds.
How do I send my rider to a promoter?
Send one link rather than an attachment, ideally the same link as your press kit, so the promoter always sees the current version. If they ask for a PDF, export it from the same source. On Backstage.dj the rider PDF is generated automatically and is free.






